Google introduced updates the new user interface for its Smart Screen Hub device at the end of March 2022. While some users can download updates without problems, others immediately find themselves dealing with bad boot loop bugs that make their devices constantly try to boot to on.
Google introduced updates the new user interface for its Smart Screen Hub device at the end of March 2022. While some users can download updates without problems, others immediately find themselves dealing with bad boot loop bugs that make their devices constantly try to boot to on.
The boot loop error is definitely a big bug to run, especially when downloading updates that make your device jam try to load. Fortunately for the Hub Nest user, fixing an actual error is very simple.
As the user is shown on Reddit, you need to do to correct the boot loop error and get the Nest Hub you work again to pull out the smart screen, then give a few minutes – some people recommend leaving it for more than 30 minutes so it can be fully reset. After a little time passed, reinstall the nest hub and it must reboot without problems at all.
Your device may not experience eternal problems, and the possibility of Google will patch this problem with the update in the future. To make sure you have installed the latest update, you can check your firmware version by tapping “settings”> “about the device” on a smart screen. If you run the Chromecast firmware version 1.56.290464 or software version 46.32.13.418036576, then your nest hub is updated.